Calibration Charges: D1.02, Standards of Dimension (w.e.f. 01.04.2019)
Calibration Charges: D1.02, Length, Dimension and Nanometrology (w.e.f.01.04.2019)
Length, Dimension and Nanometrology
Sl. No. Parameter Item Type / Group Item Name Alias Name Limitation / Condition Charges per Item Rs. Additional Charges Rs. Description for Additional Charges Remarks, if any No. of Points for Calibration
1 Length Line Standard Reference
Standard Meter Bar
Meter Bar 1m 48000 1200 For each
additional point above 10 points
  10
2 Length Line Standard Graticule Scale upto 300 mm Glass Scale 300 mm 9844 700 For each
additional point above 10 points
Laser_UMM 10
3 Length Line Standard Graticule Scale >300mm -1000 mm Glass Scale >300 upto600 mm 29175 1200 For each
additional point above 10 points
Q_vision_CMM 10
4 Length Line Standard Glass Grid 10X comparator   10500 4750 For each additional grid with same setting Mean of upto10 grid spacing of each axis 1
5 Length Line Standard Measuring Tape (Steel
/woven/glass Fibre .)
  50 m 5342 600 For each additional meter IS: 1270-1991 One point permeter
6 Length End Standard single Gauge Block Slip Gauge By Comparison Method 15500   for first gauge block and each gaugein case the gauges are odd size IS: 2984-2003, ISO:3650-1998 for first gauge block or each gauge bloack of odd size provided
NPL-India acceptsto calibrate
,Deviation from central length #
7 Length End Standard Gauge Block Set Slip Gauge By Comparison Method 15500 for
first gauge block
350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-1998 for first gauge block of set with traditional denomination
considered by NPL-india, , Deviation from central length #
8 Length End Standard Gauge Block Set Slip Gauge By Comparison Method( Designated M112) By Comparison Method 54350 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-1998 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
9 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ DesignatedM125 By Comparison Method 58900 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2000 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
10 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ DesignatedM122 By Comparison Method 57850 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2001 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
11 Length End Standard Gauge Block Set Slip Gauge By Comparison Method( DesignatedM121) By Comparison Method 57500 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
12 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ Designated M111 By Comparison Method 54000 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
13 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M105 By Comparison Method 51900 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
14 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M103 By Comparison Method 51200 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
15 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M87 By Comparison Method 45600 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
16 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M83 By Comparison Method 44200 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
17 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M79 By Comparison Method 42800 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
18 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M78 By Comparison Method 42450 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
19 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M76 By Comparison Method 41750 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
20 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M50 By Comparison Method 32650 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
21 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M47 By Comparison Method 31600 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
22 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M46 By Comparison Method 31250 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
23 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M41 By Comparison Method 29500 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
24 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M38 By Comparison Method 28450 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
25 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M33 By Comparison Method 26700 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
26 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M32 By Comparison Method 26350 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
27 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M27 By Comparison Method 24600 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
28 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M18 By Comparison Method 21450 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
29 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M10 By Comparison Method 18650 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
30 Length End Standard Gauge Block Set Slip Gauge By Comparison Method/ M9 By Comparison Method 18300 350 for subsequent gauge blocks up to 100mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
31 Length End Standard single Gauge Block Slip Gauge By Interferometric Method 22860 22860 for first gauge blockand
subsequent gauge block above 102mm
IS: 2984-2003, ISO:3650-1998 Deviation from central length #
32 Length End Standard Gauge Blocks asSet slip gauges submiited as a set By Interferometric Method 22860 1700 for first gauge blockand
subsequent gauge block up to 102mm
IS: 2984-2003, ISO:3650-1997 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
33 Length End Standard Gauge Block Set Slip Gauge SetBy
Interferometric Method/M112
By Interferometric Method 211560 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-1997 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
34 Length End Standard Gauge Block
Set
Slip Gauge By
Interferometric Method/ M125
By
Interferometric Method
233660 1700 for subsequent gauge blocks up to 102mm IS:
2984-2003, ISO:3650-1998
for first
gauge block of set with traditional denomination considered by
NPL-india,Deviation from central
length #
35 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M122 By Interferometric Method 228560 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-1999 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
36 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M121 By Interferometric Method 226860 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2000 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
37 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M111 By Interferometric Method 209860 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2001 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
38 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M105 By Interferometric Method 199660 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2002 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
39 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M103 By Interferometric Method 196260 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2003 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
40 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M87 By Interferometric Method 169060 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2004 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
41 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M83 By Interferometric Method 162260 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2005 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
42 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M79 By Interferometric Method 155460 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2006 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
43 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M78 By Interferometric Method 153760 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2007 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
44 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M76 By Interferometric Method 150360 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2008 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
45 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M50 By Interferometric Method 106160 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2009 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
46 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M47 By Interferometric Method 101060 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2010 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
47 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M46 By Interferometric Method 99360 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2011 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
48 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M41 By Interferometric Method 90860 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2012 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
49 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M38 By Interferometric Method 85760 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2013 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
50 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M33 By Interferometric Method 77260 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2014 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
50 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M27 By Interferometric Method 67060 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2016 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
53 Length End Standard Gauge Block Set Slip Gauge By Interferometric Method/ M18 By Interferometric Method 51760 1700 for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2017 for first gauge block of set with traditional denomination
considered by NPL-india,Deviation
from central length #
57 Length End Standard Gauge Block Set for Mechncial comparator
calibration
Special Gauge
Set viz.M10/M11/M12/M18 (Excluding
bridge type Gauge)
By Interferometric Method 55000 for
first ten guages
3500 for first ten guages and for subsequent gauge blocks up to 102mm IS: 2984-2003, ISO:3650-2018 , Euramet-Cg-2,2011 Deviation from central length by inteferometry and ( Fo, Fu by
comparison or Length variation 1mm, 1.005mm, 1.01mm size ofgauge blocks)
58 Length End Standard Length
Bar
Long Slip Gauge By Comparison Method(
Horizontal)
8200 above 100mm
upto 300 mm
per gauge Single
Point(length)
IS: 7014-1973 (Reaffirmed 2005) per gauge (central length dev)
59 Length End Standard Length Bar Long Slip Gauge By Comparison Method(
Horizontal)
8500 above300mm
upto 500 mm
per gauge Single Point(length) IS: 7014-1973 (Reaffirmed 2005) per gauge (central length dev)
60 Length End Standard Length Bar Long Slip Gauge By Comparison Method(
Horizontal)
11500 above 500 to
1000 mm
per gauge Single Point(length) IS: 7014-1973 (Reaffirmed 2005) per gauge (central length dev)
61 Length Thickness Standard Feeler Gauge Leaf Gauge / Slip By Comparison Method(
Horizontal)
6000 3000 each
leaf
for first leaff and subsequent leaf IS: 3179-1990 (Reaffirmed 2005) Thickness
62 Length Diameter Standard Plain Ring / Plug Gauge/sphere   By Comparison Method(
Horizontal)
8500 (Upto 100 mm) IS: 3484-1993 / IS: 3485-1993 (Reaffirmed 1998) Diameter and Variation in Diameter
63 Length Dia Standard Plain Ring / Plug Gauge/sphere   By Comparison Method(
Horizontal)
11000   >100 to 300 mm IS: 3484-1993 / IS: 3485-1993 (Reaffirmed 1998) Diameter and Variation in Diameter
64 Length Dia Standard Taper Plug/ Ring Gauge   By Comparison Method(
Horizontal)
11500 Upto 250 mm     Taper
65 Length Instrument Dial Gauge, Plunger Type   By Comparison Method(
Horizontal)
8000 0 to 50 mm     IS: 2092-1993
66 Length Instrument Dial Gauge, Lever Type   By Comparison Method(
Horizontal)
8000 0 to 10 mm     IS: 11498-1995
67 Length Instrument Engineering Parallel     3880 Upto 1000 mm     IS: 4241-1995
68 Length Instrument Gauge Block Calibrator * Comparator By Comparison Method 18715       Single Scale only
69 Length Instrument Gauge Block Calibrator Comparator By Comparison Method 37500       Three Scales
70 Length Instrument Mechanical Comparator   By Comparison Method 24500        
71 Length Instrument Floating Carriage Diameter Measuring Machine FCDMM By Comparison Method 30000        
72 Error of Indiacate Displacement Instrument Length Measuring Machine/
Dial Gauge Tester
LMM / Horinzontal Metroscope / I Checker /Universal Measuring
Machine /Digital Height Gauge
  20500     wavelenght compensated Upto 25 mm(per Axis )
73 Length Instrument Length Measuring Machine / Dial Gauge Tester LMM or Horinzontal Metroscopeor Universal Measuring Machine/Digital Height Gauge   20500 2500 for subsequent 100 mm up to 1000 mm wavelength compensated for first 100mm (above 25 mm upto 100mm) of Single Axis in one
orientation/each axis
74 Length Instrument Length Measuring Machine (Single Axis) LMM or Horinzontal Metroscope or Universal Measuring Machine
/Digital Height Gauge
  46000 8800 For each additional meter   up to 1000 mm (Single Axis/each axis)
75 Length Instrument Caliper Checker/ Check Master step gauge   28000 5000 for subsequent 100 mm up
to 1000 mm(above 300 mm upto 1000mm)
  for first 300mm / upto 300mm
76 Length Instrument 3D-Coordnate Measuring Machine CMM/Articulated CMM   48000 8800 subsequent 1 mm per
axisabove 1 m
single axis up to 1m(addiotnal
charges for subsequent 1m)
77 Length Instrument 3D-Coordnate Measuring Machine CMM/Articulated CMM   150000 8800 For each additional meter three axis Three axes, upto 1000 mm per axis
78 Length Instrument CNC Machine Boring Machine /automatic
moving machine up to 30m single axis
  50000 8800 subsequent 1m per
axisabove 1m
  up to 1m x1m x 1m(addiotnal charges for subsequent 1m per axis )
79 Length Instrument CNC Machine Boring Machine /automatic moving machine up to 30m three axis   139000 8800 For each additional meter   Three axes, upto 1000 mm per axis
80 Length Instrument Dial Gauge Tester / Extensometer (ExceptI Checker /
Motorized dial tester)
  24500 5000 per additional orientation/axis (ExceptI Checker /
Motorized dial tester)
 
81 Length Instrument Electronic Probe     24500 5000 per additional scale    
82 Length Accessory Test Sieve Sieve IS: 460- 1985 16000      
83 Angle Angle Standard Angle Gauge block   IS: 6231-1994 9500 2000 for subsequent angle measurment on each angle block or on same
block
   
84 Angle Angle Standard Angle square block   IS: 6231-1994 15500        
85 Angle Instrument Polygon /Indexing Table/Optical Dividing Head with Scale angular encoder,optical level IS: 6987 / and 55000 3300 upto 12 Faces and For each
additional face beyond 12 faces
   
86 Angle Instrument Spirit Level Level meter/Point laser level/optical level/line laser level/
Inclinometer
IS: 5706-1991 14000        
87 Angle Instrument Electronic Level Level meter/Point laser level/optical level/line laser level   34000 6000 per point after 10 points   Angle
88 Angle Instrument Auto-collimeter (Single Axis) Collimator/ thodolite station collimator/Angle dekker   28000       Angle
89 Angle Instrument Auto-collimeter (Dual Axis) Collimator/ thodolite station collimator/Angle dekker   42000       Angle
90 Length & Angle Instrument Profile Projector vedio profiler/vedio measuring machine   48000 8800 for subsequent 100 mm up to 1000 mm   Linear Scales up to 300mm and magnifications only
91 Length & Angle Instrument Profile Projector vedio profiler/vedio measuring machine   24000       Angular Scale only
92 Length & Angle Instrument Profile Projector vedio profiler/vedio measuring machine   65500 8800 for subsequent 100 mm up to 1000 mm   Linear scales up to 300mm,
magnifications
93 Length & Angle Instrument Profile Projector vedio profiler/vedio measuring machine   72000 8800 for subsequent 100 mm up to 1000 mm   Linear up to 300mm, Angular Scales & magnifications
94 Length & Angle Instrument Sine Bar / tilting table Sine Bar IS:5359-1993 /

IS: 5979-1991
30000     up to 300mm Centre distance of rollers, Flatness of Face, parallelism of
rollers
95 Length & Angle Instrument Sine Bar / tilting table Sine Bar IS:5359-1993 /

IS: 5979-1991
34000     above 300 mm Centre distance of rollers, Flatness of Face, parallelism of
rollers
96 Length & Frequency Laser Source Laser Interferrometer Customer
needs to ensure its frequency stabilty (preferable by its prior calibration-
certificate)
Distance / fringe count 48000       Linear Displacement
97 Form Instrument Tool Maker’s Microscope Universal
Measuring Microscope
  41000 11000 For Z axis   Linear Scales and magnifications only
98 Form Instrument Tool Maker’s Microscope Universal Measuring Microscope   26500       Angular Scale only
99 Form Instrument Tool Maker’s Microscope Universal Measuring Microscope   67500 10000 For Z axis   Linear, Angular Scales & magnifications
100 Form Instrument Formtester Formtester/Roundness measuring machine   26200       Roundness,
101 Form Instrument Formtester Formtester/Roundness measuring machine up to 100mm straightness wayguide length 50400   up to 100mm straightness wayguide length   Roundness, Staightness,
102 Form Instrument Formtester Formtester/Roundness measuring machine up to 100mm straightness wayguide length 115000   up to 100mm straightness wayguide length   Roundness, Staightness, R-axis, Z-axis
103 Roughness Roughness Standard@ Groov Depth Standards (Type D) / Roughness Comparison
Specimen
Groov Depth Standards (Type D) / Roughness Comparison
Specimen
ISO: 5436 (Type D) / IS: 4290-1992, IS: 3073-1991 9500 1000 per
subsquent roughness paramter
up to 50µm upto one
roughness paramter on the same specimen
104 Roughness Roughness Standard@ Roughness measuring machine Roughness measuring machine/ Roughness tester ISO: 5436 (Type D) / IS: 4290-1992, IS: 3073-1991 28500 8800 per axis
calibration with a dispalcement standard(laser interferometer/ dial
indicator/ glass scale)
  with atleast
three Groov Depth Standards (Type D) /three Roughness Comparison
Specimen
105 Roundness Roundness Standard Hemispherical Standard     26200       Roundness
106 Roundness Roundness Standard Flick Standard maginification standard   26200       Roundness
107 Squareness Squareness Standard Engineer's Square   IS: 2103-1980 reaffirmed 2006 15900     Squareness
108 Squareness sqness, straightness, roundness, parallelism Reference /Standard cylinder   Roundness , parallelism (four readings) ,cylindricilty 74500       Roundness , parallelism (four readings) ,cylindricilty
109 Squareness Squareness Standard Cylindrical Square   On CMM 18300     IS: 6952-1990 reaffirmed 2006 Squareness
110 Squareness Squareness Standard Engineer's Square   On CMM 24200     IS: 2103-1980 reaffirmed 2006 Squareness
111 Squareness Squareness Standard Cylindrical standard   On roundness Machine 24200       Squareness /Parallelism
112 Squareness Squareness Standard Angle Plate, Cast Iron   Upto 300 mm 16300     IS: 2554-1971 (Reaffirmed 2005) On CMM Squareness / Angularity
113 Squareness Squareness Standard Angle Plate, Cast Iron   >300 to 600 mm 24400   IS: 2554-1971
(Reaffirmed 2005) On CMM
Squareness / Angularity
114 Squareness Squareness Standard Precision Box Angle Plate   Upto 300 mm 30300     IS: 6985-1973 (Reaffirmed 2005) ,On CMM Squareness / Angularity
115 Squareness Squareness Standard Precision Box Angle Plate   >300 to 600 mm 44500   On CMM IS: 6985-1973 (Reaffirmed 2005), On CMM Squareness / Angularity
116 Straightness Accessory Straight Edge(Bow
Shaped)/ (Camel Back type)/ (I-Section)/ (Parallel)
(Bow Shaped)/ (Camel Back type)/ (I-Section)/ (Parallel) Upto 500 mm 11800     IS: 2220-1995 (Reaffirmed 2005) Straightness
117 Straightness Accessory Straight Edge(Bow
Shaped)/ (Camel Back type)/ (I-Section)/ (Parallel)
(Bow Shaped)/ (Camel Back type)/ (I-Section)/ (Parallel) >500 to 1000 mm 18300     IS: 2220-1995 (Reaffirmed 2005) Straightness
118 Flatness Accessory Surface Plate   160 x 160 mm 11114     IS: 2285-2003IS: 7327-2003/On CMM Flatness
119 Flatness Accessory Surface Plate   450 x 450 mm 11114     IS: 2285-2003IS: 7327-2003/On CMM Flatness
120 Flatness Accessory Surface Plate   630 x 630 mm 18018     IS: 2285-2003IS: 7327-2003 Flatness
121 Flatness Accessory Surface Plate   1000 x 630 mm 22620     IS: 2285-2003IS: 7327-2003 Flatness
122 Flatness Accessory Surface Plate   1000 x 1000 mm 29524     IS: 2285-2003IS: 7327-2003 Flatness
123 Flatness Accessory Surface Plate   1600 x 1000 mm 50235     IS: 2285-2003IS: 7327-2003 Flatness
124 Flatness Accessory Surface Plate   2000 x 1000 mm 59440     IS: 2285-2003IS: 7327-2003 Flatness
125 Flatness Accessory Surface Plate   2000 x 1400 mm 59440     IS: 2285-2003IS: 7327-2003 Flatness
126 Flatness Accessory Surface Plate   3000 x 2000 mm 87055     IS: 2285-2003IS: 7327-2003 Flatness
127 Flatness Accessory Optical Flat/Parallel   up to 100mm Diameter 22315     IS: 5440-1969 (Reaffirmed 2005) Flatness of one surface
128 Flatness Accessory Optical Flat/Parallel   up to 100mm Diameter 32876     IS: 5440-1969 (Reaffirmed 2005) Flatness of both surface
129 Flatness Accessory Optical Flat/Parallel   up to 100mm Diameter 46454     IS: 5440-1969 (Reaffirmed 2005) Flatness and parallelism/ wedge angle between two surface
130 Flatness Accessory Optical Flat/Parallel   >100mm to 150mm Diameter 46454     IS: 5440-1969 (Reaffirmed 2005) Flatness of one surface
131 Flatness Accessory Optical Flat/Parallel   >100mm to 150mm Diameter 55506     IS: 5440-1969 (Reaffirmed 2005) Flatness of both surface
132 Laser
frequecny
frequency
statdard
Laser head   frequency
Standard
51877        
133 Step height End standard step height End standard above 50 µm
upto to 2 mm
14142     ISO 5436 height of the step/ groove
134 Length Instrument Vernier Caliper instrument up to 300 mm 7200 100 per additional 100 mm IS 3651 Linear scale including vernier scale
135 Length Instrument Micrometer / Micrometer Head instrument up to 25 mm 7200 150 per additional 25 mm IS 2967 Linear scale including vernier scale
136 Length Instrument Hardness
tester Scale
depth measuring system When the
requisite fixtures and accessories are facilitated by customer
48000     0.0003 mm
accuracyup to 100mm
Nonmagnetic method
137 Angle Instrument Theodelite calibration station universal station/ 3D simulator When the requisite fixtures and accessories are facilitated by
customer
60000     Three pitch angle and a rotary axisup to 10 readings Three pitch angle and a rotary axiswith reference to ground level
138 Angle Instrument Theodelite calibration station universal station/ 3D simulator When the requisite fixtures and accessories are facilitated by
customer
60000 43000 Additional dual axis collimator upto 40 readings Three pitch angle and a rotary axisup to 10 readings Three pitch angle and a rotary axis with reference to ground level
139 Length artifact Test rail Defects in
test rail
Notch
size(length:5mm to 10 mm)X (width:
0.4mm to 5 mm)X(depth: up to 2 mm)
47500 2500 subsequent
each Notche/ hole
length Xwidth Xdepth up to 20
Notches or holes

NOTE: # Rs 100 per gauge will be charged extra for addition of fo , fu using comparator (except for special guage block set of Mech. comparator calibrator)

# Rs 300 per gauge block for flatness and length variation by interferometric method (in case interferometric central deviation calibration)

# Given below are charges for Gauge block calibration by interferometry. For the gauge block set which is sent to NPL for first time by interferometry, charges of comparison method stated above as well as interferometric metod will be charged

M122 is known as designated (The suffix M denote ) gauge block set with conventional denominations of gauge block sizes

CONTACT INFORMATION